Ikan - DS2 Beholder 3-Axis Gimbal Stabilizer with Encoders
Details
- Works with DSLR & Mirrorless Cameras under 4 lbs
- Durable All Aluminum Construction
- 360 Degree Movement on pan axis
- Equipped with 3 Axis Gyro Stabilized Brushless Motors
- OLED Display Screen to show operating modes
- Equipped with 32-Bit Controller & 12-Bit Encoder
- Lithium Battery Powered- Low Maintenance, Eco-Friendly
- Illuminated ON-OFF Switch/Battery Indicator 3/8"-16 Tripod Mount Socket
DS2
The Ikan Beholder DS2 is the successor to the popular DS1. The DS2 is designed specifically for professional filmmakers looking for a single handheld stabilizer for a large range of small cameras weighing up to 4 lbs. The DS2 features a 60 second Auto-Sweep mode, which allows you to program a 60 second camera movement. The Beholder DS2 is lightweight, easy to use, and can be carried in your camera bag. In addition, the DS2 is versatile enough to be used with a DSLR, mirrorless camera, GoPro or smartphone.
Designed for DSLR and Mirrorless Cameras
With a payload of up to 4.5 lbs., the DS2 has the ability to stabilize a wide range of today's popular DSLR and mirrorless cameras including the Canon 5D Mark IV, Canon 6D, Sony a6300,, Sonyt a7SII, Panasonic GH5, GoPro, and smartphone.
Advanced Stabilization
Using a 32-bit controller with a 12-bit encoder, the DS2 uses an adaptive PID algorithm to produce an efficient handheld stabilizer. This means that the gimbal will respond faster, balance easier, and have greater battery life.
Lock Mode
In Lock Mode, the yaw, pitch, and roll axis work together to keep the camera pointed in one direction. The camera's composition will stay the same no matter how you move the handle.
Point & Lock
Quickly lock your camera into any position by manually pointing and holding it in any direction. After a few seconds, the camera will lock and hold its position until it is reset back to default.
Auto Inversion
Switch to Inverted Mode at any time by simply flipping the handle over the camera. Inverted Mode can be operated in conjunction with any of the Lock and Follow Modes.
Multiple Follow Modes
The DS2 features 3 different follow modes. In Yaw-Axis Follow Mode, the DS2 will only follow your pan movements. In Pitch and Yaw-Axis Follow mode, the DS2 will follow your pan and tilt movements. Finally, the 3-Axis Follow Mode gives you full control allowing you to pan, tilt, and roll.
60 Second Auto-Sweep
The DS2 has a 60 second auto-sweep feature that allows you to program a 60 second movement. Position the camera at the end point, and then press the mode button 5 times. Then, position the camera at the start point and let the DS2 do the rest! The camera will move from one point to the other in a 60 second time frame.
OLED Status Display
A display screen located on the handle conveniently provides you with the battery life and current operating mode.
Easy to Use
With a newly designed quick-release baseplate system, the DS2 is easy to balance without any tools.
Multiple Mounting Options
The DS2 handle comes with two 1/4"-20 mounts that are perfect for mounting accessories such as a light, microphone, or monitor. A 3/8"-16 thread located on the bottom allows you to securely mount the DS2 to a tripod, jib, or dual handle support system such as the Ikan DGH.
1 X Battery Cap With 3/8-16 Mount (Pre-Assembled)
1 X Battery Holder (Pre-Assembled)
1 X DS2 Gimbal Stabilizer
1 X Instruction Manual
1 X Micro USB AC Adapter
1 X Quick Release Plate (Pre-Assembled)
1 X Travel Case
3 X 18650 Batteries
| Battery Charge Time: | 3 - 4 Hours |
| Battery Operating Time: | 8-10 Hours |
| Battery Stand By Time: | Up to 20 Hours |
| Battery Type: | 18650, 3.7V, 2600mAh, Li-Ion Batteries |
| Camera Compatibility: | Mirrorless and DSLR Cameras |
| Payload: | 4 lbs (1800 g) |
| Shipping Dimensions: | 15.1 x 8.8 x 2.9 in. |
| Shipping Dimensions (Metric): | 38 x 22.3 x 7.3 cm |
| Shipping Weight: | 6 lbs |
| Shipping Weight (Metric): | 2.7 kg |
| UPC Code: | 847983022618 |
| Working Angle (Pan Motor): | 360° |
| Working Angle (Roll Motor): | 310° |
| Working Angle (Tilt Motor): | 310° |
Product Information
| Item Code: | IKA02061 |
|---|---|
| Manufacturer Product Code: | DS2 |
| Weight (kg): | 2.7000 |
| Warranty: | No |
- Works with DSLR & Mirrorless Cameras under 4 lbs
- Durable All Aluminum Construction
- 360 Degree Movement on pan axis
- Equipped with 3 Axis Gyro Stabilized Brushless Motors
- OLED Display Screen to show operating modes
- Equipped with 32-Bit Controller & 12-Bit Encoder
- Lithium Battery Powered- Low Maintenance, Eco-Friendly
- Illuminated ON-OFF Switch/Battery Indicator 3/8"-16 Tripod Mount Socket
DS2
The Ikan Beholder DS2 is the successor to the popular DS1. The DS2 is designed specifically for professional filmmakers looking for a single handheld stabilizer for a large range of small cameras weighing up to 4 lbs. The DS2 features a 60 second Auto-Sweep mode, which allows you to program a 60 second camera movement. The Beholder DS2 is lightweight, easy to use, and can be carried in your camera bag. In addition, the DS2 is versatile enough to be used with a DSLR, mirrorless camera, GoPro or smartphone.
Designed for DSLR and Mirrorless Cameras
With a payload of up to 4.5 lbs., the DS2 has the ability to stabilize a wide range of today's popular DSLR and mirrorless cameras including the Canon 5D Mark IV, Canon 6D, Sony a6300,, Sonyt a7SII, Panasonic GH5, GoPro, and smartphone.
Advanced Stabilization
Using a 32-bit controller with a 12-bit encoder, the DS2 uses an adaptive PID algorithm to produce an efficient handheld stabilizer. This means that the gimbal will respond faster, balance easier, and have greater battery life.
Lock Mode
In Lock Mode, the yaw, pitch, and roll axis work together to keep the camera pointed in one direction. The camera's composition will stay the same no matter how you move the handle.
Point & Lock
Quickly lock your camera into any position by manually pointing and holding it in any direction. After a few seconds, the camera will lock and hold its position until it is reset back to default.
Auto Inversion
Switch to Inverted Mode at any time by simply flipping the handle over the camera. Inverted Mode can be operated in conjunction with any of the Lock and Follow Modes.
Multiple Follow Modes
The DS2 features 3 different follow modes. In Yaw-Axis Follow Mode, the DS2 will only follow your pan movements. In Pitch and Yaw-Axis Follow mode, the DS2 will follow your pan and tilt movements. Finally, the 3-Axis Follow Mode gives you full control allowing you to pan, tilt, and roll.
60 Second Auto-Sweep
The DS2 has a 60 second auto-sweep feature that allows you to program a 60 second movement. Position the camera at the end point, and then press the mode button 5 times. Then, position the camera at the start point and let the DS2 do the rest! The camera will move from one point to the other in a 60 second time frame.
OLED Status Display
A display screen located on the handle conveniently provides you with the battery life and current operating mode.
Easy to Use
With a newly designed quick-release baseplate system, the DS2 is easy to balance without any tools.
Multiple Mounting Options
The DS2 handle comes with two 1/4"-20 mounts that are perfect for mounting accessories such as a light, microphone, or monitor. A 3/8"-16 thread located on the bottom allows you to securely mount the DS2 to a tripod, jib, or dual handle support system such as the Ikan DGH.
1 X Battery Cap With 3/8-16 Mount (Pre-Assembled)
1 X Battery Holder (Pre-Assembled)
1 X DS2 Gimbal Stabilizer
1 X Instruction Manual
1 X Micro USB AC Adapter
1 X Quick Release Plate (Pre-Assembled)
1 X Travel Case
3 X 18650 Batteries
| Battery Charge Time: | 3 - 4 Hours |
| Battery Operating Time: | 8-10 Hours |
| Battery Stand By Time: | Up to 20 Hours |
| Battery Type: | 18650, 3.7V, 2600mAh, Li-Ion Batteries |
| Camera Compatibility: | Mirrorless and DSLR Cameras |
| Payload: | 4 lbs (1800 g) |
| Shipping Dimensions: | 15.1 x 8.8 x 2.9 in. |
| Shipping Dimensions (Metric): | 38 x 22.3 x 7.3 cm |
| Shipping Weight: | 6 lbs |
| Shipping Weight (Metric): | 2.7 kg |
| UPC Code: | 847983022618 |
| Working Angle (Pan Motor): | 360° |
| Working Angle (Roll Motor): | 310° |
| Working Angle (Tilt Motor): | 310° |
-
-
MS1 Beholder Mirrorless Camera Gimbal - EX Demo - While Stocks Last
Add to WishlistRRP (inc GST)
Our Price (inc GST)
-
MS-PRO Beholder 3-Axis Gimbal Stabilizer with Encoders - for Mirrorless Cameras
Add to WishlistRRP (inc GST)
Our Price (inc GST)
-
EC1-DGH-KIT EC1 Beholder 3-Axis Gimbal Kit w/ Dual Grip Handles for DSLRs & Mirrorless Cameras
Add to WishlistRRP (inc GST)
Our Price (inc GST)
-
-
-
DGH Dual Grip Gimbal Handle & Tray for DS1 & MS1 Gimbal Stabilizers
Add to WishlistRRP (inc GST)
Our Price (inc GST)
-
MS-PRO-DGH-KIT MS-PRO Dual Grip Handle Gimbal Kit for Mirrorless Cameras
Add to WishlistRRP (inc GST)
Our Price (inc GST)
-
-
EC1 Beholder Gimbal for DSLRs and Mirrorless Cameras
Add to WishlistRRP (inc GST)
Our Price (inc GST)
-
